Keeping Your Cool: The Complete Guide to Refrigerator Maintenance for Homeowners in Oregon

A refrigerator in your house used to be regarded as a luxury. But today, it’s a common household device. It is anticipated that by 2025, the industry will be worth 78.22 billion dollars.

You shouldn’t purchase this appliance frequently, though. How then can you maintain a smooth-running refrigerator? You maintain your refrigerator on a regular basis.

We have this guide to help you if you’re unsure of what you ought to be doing. Learn how to keep your refrigerator running cool by reading on.

Three Types of Refrigerators

You must ascertain the type of your fridge before you or a professional begins working on it. There are mostly three kinds. Although they all perform the same basic functions, freezers operate in a variety of ways. Refrigerant is cycled over a number of cycles. The cooling is done by one set, and the heat is released by the other set.

The original and most fundamental design of a refrigerator is a manual defrost model. By shutting it off and allowing the ice to melt, you can defrost it. The cycle defrost is a little more sophisticated. It has an automatic cycle to help prevent the accumulation of frost. However, you still need to manually turn the dial to the defrost position.

The third type is a frost-free model. These are the most common today and use a heater to melt the ice.

Clean the Condenser Coils

Condenser coils should be located at the back or bottom of your refrigerator. You might need to snap off a panel or remove few screws in order to remove it.

To clean the coils, you may go out and get a specialised tool. However, you can get away without it if you use your vacuum cleaner and a stiff brush attachment.

Vacuum on, then pass the brush over the coils. Remove any dust, debris, and pet fur firmly but gently.

At least twice a year, do this. The coils can efficiently cool your refrigerator or freezer when they are clean.

The coils are insulated by the dirt, dust, and pet hair, which keeps the heat that they are intended to be releasing within. As the heat increases, the compressor protector finally turns off the entire system.

When it cools, the system will eventually turn back on, but by that time, your food will already be warm.

Clean the Condenser Fan

You don’t have a condenser fan if your refrigerator has coils on the rear. You have a fan if the coils are on the bottom of your refrigerator. While you are cleaning the coils, clean the fan.

To help the coils dissipate heat, the fan moves air through them. The fan will eventually become so clogged with dirt and junk that it will stop working altogether.

Make careful to only clean your refrigerator when it is unplugged for your own safety. In this manner, the fan won’t automatically turn on as you are cleaning.

Wipe down the Door Gasket

The seal that surrounds the outside of the door is called a gasket. It is what keeps the cold air within your refrigerator from leaking out.

You may spend $100 to $200 replacing the gasket on your refrigerator. By routinely wiping down your gasket, you may prevent this.

Air leaks are reduced when the gasket is kept clean. A fridge that is more efficient has fewer air leaks.

Once every month, remove anything sticky from your gasket. Food or liquids may dry up and seal the gasket down, which causes the gasket to tear when the refrigerator opens.

Clean the gasket of anything sticky about once a month to avoid this. After that, lubricate your gasket by dusting some baby powder on a cloth and wiping it down.

Clear out the Freezer Vents

Find the vents in your freezer by taking a look inside. Keep anything that can clog them away from these. Also, avoid stuffing your freezer so tightly that the air cannot circulate.

Generally speaking, you should only fill your freezer 3/4 of the way. In this manner, there will be sufficient room for your frozen goods to be adequately surrounded by cold air.

Are your thermostat settings in the middle?

Fridge and freezer settings should be kept in the centre. From there, you can make adjustments in accordance with the refrigerator’s thermometer.

Set your refrigerator to a temperature between 38 and 42 for maximum efficiency. The ideal temperature for your freezer is between 0 and 10.

Maintaining the proper temperature won’t necessarily stop repair. It will increase the lifespan of your refrigerator. Additionally, it will enable your refrigerator to function at its best and reduce your electricity usage.

Clean the Drip Openings

The melted water travels via the drip holes before entering the drain pan. Usually, the drain pan is situated close to the compressor. The water then evaporates once it is in the pan.

The food compartment of a refrigerator with cycle defrost will include a tube. Under your crisper drawer, if your refrigerator is frost-free, you’ll find a little cap.

Ensure that these drains are free of obstructions. If they become clogged, the water won’t drain and will accumulate in the refrigerator. When you open the refrigerator door, it will eventually start to flow out, leaving a puddle in your kitchen.

Perform Your Refrigerator Maintenance

You can prevent some costly problems by carrying out these refrigerator maintenance procedures on a regular basis. Make a schedule for yourself and complete these duties on a monthly, quarterly, and annual basis as required.

Instead of maintenance, does your refrigerator require repairs? Give us a call right away, and we’ll have your refrigerator operating efficiently in no time.